|

Introduction:::...
One
of the advantages that comes from buying a high-end graphics
card is that, being as they generally run hotter, they usually
come with fairly efficient coolers.
Of
course the better the cooler the higher the cost so, although
the cooler is almost certainly up to the task of cooling
the GPU/VPU it sits on, it's unlikely to set any records,
either in looks or in performance terms.
Then
there are the conservatively or passively cooled mid to
low-end cards. Great for silent operation so long as you
don't push them too hard but often not with a great deal
of overclocking potential built in.
Today
I want to look at an aftermarket VGA cooling kit from Jetart,
a company established back in 1989 and with a strong ODM
portfolio. In short, they don't just rebadge other people's
stuff, they design and manufacture it themselves, often
to be rebadged and sold by others. A few very well known
names sell Jetart's products under their own badge.
| Description
|
VGA
Cooling Kit, recommended for:
nVIDIA
GeForce3 Ti 200, 500
nVIDIA
GeForce4 MX 420, 440, 440 SE, 440 8X, 460
nVIDIA
GeForce FX 5200, 5600
ATi
RADEON 9200, 9200 PRO, 9500 PRO, 9600, 9600 PRO, 9700
PRO, 9800 PRO
|
| Features
|
All
in one VGA cooling Kit
Twin
color super bright LED fan
Push-Pin
design for easy installation
Copper
heatsink design for faster heat dissipation
High
performance ball bearing fan
|
| Specifications
|
| Cooler
Dimensions |
85
x 62 x 15.7 mm |
| Fan
Dimensions |
40
x 40 x 9 mm
|
| Heatsink
Material |
Copper
|
| Reted
Voltage |
DC
12 V
|
| Rated
Current |
0.09
Amp
|
| Power
Consumption |
1.08
W
|
| Fan
Speed |
6000
R.P.M. |
| Bearing
Type |
Ball
Bearing |
| Weight |
77
gm |
| Accessories |
•
Memory Heatsink :
• 20 x 20 x 6 mm x 4 pcs
• Cable Adapter :
• 3 to 4 pin power supply connector
x 1 pc
• Double - side Thermal Tape :
• 18 x 18 mm x 4 pcs
• Patented Insert :
• Nylon insert x 4 pcs
• Thermal Paste : 1.5 gm x 1 pc
|
|
|